6 réponses à ce sujet

[Dragoro21]

Whats the pattern or how do ya figure it out to get across the bridge? Ive been tryin for an hour now and farthest I can get is to the second platorm! Please help!

[Dragoro21]

Please help, this is driving me nuts!

[BackwardCompatibility]

Okay, it's quite hard for me to remember the right spots so I will only talk about the general approach of it.
Notice the combinations of two brigde parts of each of the spots.
When two spots coincide together, they become ''real'' and your character can move on it.
Your goal is to build a path, one bridge part at a time (or should I say two?) by moving your characters to spots that will blend the same bridge part three times. If it doesn't, when your character will move, you will fall because you will only have it ''real'' once.
The way it should go is something similar to this:
Place character 1 and 2. You can move one square.
Place character 3. You can move another square.
Move character 1 somewhere else. Half of the part appears. Move character 2. You should be able to move to another square. If you failed, that's because the spot you chose did not support two times the bridge part you were on.
Move character 3, then 1 again. You have it done.
Look further on the forum. I saw many other posts on solving the gauntlet.

Modifié par BackwardCompatibility, 09 novembre 2009 - 11:28 .

[Selzurius]

Hey there Dragoro. Check out this thread for a diagram someone drew up showing which button activates which platform. The challenge is to activate them in the correct sequence to get at least one character all the way across.

http://social.biowar...47/index/141889

That means..

3 characters hitting buttons

1 character on the bridge progressing across

Each bridge platform takes two "charges" to become solid. There are three buttons along the right hand side that manifest two platforms at the same time. The real key here is figuring out which character you can move without dematerializing the platform your walker is currently standing on - and then run around figuring out where you need to stand.

Hope this helps. If it doesn't, I can post the sequence for you later.

---

On the diagram, the first sequence would be..

Left side: 3, 6
Right Side: 2

Then you move the character from Left 3 to Right 4..

Then you move the character from Left 6 to Right 5.. etc.

Modifié par Selzurius, 09 novembre 2009 - 11:31 .

[andysdead]

Dragoro21 wrote...

Whats the pattern or how do ya figure it out to get across the bridge? Ive been tryin for an hour now and farthest I can get is to the second platorm! Please help!

i can't recall the pattern i used, but i will tell you my strategy.

i recorded each and every combination i could come up with on a piece of (real-life) paper, and then followed the pattern that would let me move one character across the bridge.

it took me a good 45 minutes, but i got it eventually.

[Mireneye]

You already got plent of good answers I see.

I only wanted to say that my approach was memorize the 4 ways you have double pieces of the bridge active and then simply putting them together with what character who could move without the currently crucial (the one with the player standing on it) would dissapear.

Modifié par Mireneye, 09 novembre 2009 - 11:54 .

[Dragoro21]

Thanks guys. It figures that 2 mins after my second post, i got lucky and made it lol.