3 réponses à ce sujet

[EzCoGhostRider]

I have tried both these to try to cross bridge neither works as posted on forum.Left side 3&6,Right Side2. Move char left 3 to right 4,move char left 6 to right 5 etc.

Second one 3 left,1&3 right
6 left,2&4 right
1 left,1&5 right
4&5 left, 5 right.

These combinations according to forum work,but i can't get them to work, any hints please.

Thanks John

[danien.grey]

Make sure you're counting the right number of tiles when you're assigning positions. I made the mistake of constantly thinking tile #5 was #6 and spent an hour in frustration before I realised I was being an idiot. I then crossed the bridge.

Modifié par danien.grey, 12 novembre 2009 - 02:58 .

[Quaxo]

Moving the character on L6 should be the third move. I'll describe the order again:

Start: L3, L6, R2.
Move main across first to second platform.
Move: L3 to R4.
Move: R2 to L1.
Move main to third platform.
Move: L6 to R5.
Move: R4 to L5.
Move main across to other side. Done.

(Edited, I left one move out.)

Modifié par Quaxo, 12 novembre 2009 - 03:03 .

[Rogue-Element]

I simply took a piece of paper and made a quick sketch. Define a "north", draw the tiles and which section of the bridge they activate. Then you can use it as a map.



Keep in mind that you always need at least one character on each side for the bridge to work.