20 réponses à ce sujet

[johnnygto!]

Having difficulties with mouse calibration i have to move the cursor way to the right to click somthing that is cleary not under the cursor to the left. hoping someone might have a quick fix for this. btw i am useing eyefinity

[Maraid]

Having the same problem here, driving me crazy

[Jusme10]

Same here, click, click, click...........click and character does nothing. He stands in a fighting stance and when he does fight, its all over with.   Same when trying to talk to npc and the mouse jumps to the far right of the screen...

[Luke Barrett]

Try changing your resolution. Are you by chance in 1680 x 1050? Also, are you in windowed mode or fullscreen?

[johnnygto!]

Luke im running in 3240 x 1920

[foil-]

Luke,
I'm running at the resolution you stated (1680x1050). Its the highest resolution my monitor will run at (an the native resolution). I did not have the issue in the demo.

My mouse is only slightly off. It has to be near the top edge of an icon or menu option.

Thanks.

[rainmaker4]

i have the same issue, trying to run 1920 x 1280 in fullscreen mode as this is what i ran in DA. My screen is 16:9

[rainmaker4]

never mind, the problem seemed to be the full screen mode was throwing the mouse off.
But this begs the question, how do we play full screen mode without the mouse issues?

[foil-]

Luke Barrett wrote...

Try changing your resolution. Are you by chance in 1680 x 1050? Also, are you in windowed mode or fullscreen?

Luke, I'm curious why you stated that resolution.  Is there a known bug that is being looked at.  If so, I will just set the game aside until the patch comes out and stop banging my head (lightly) against the wall trying to solve the issue for my computer.

Thanks

[musicallie44]

I have a similar problem.
My mouse can't seem to "see" certain objects in the environment. I try to open doors, but the mouse won't transform into the "door" shape. If I switch to a companion - usually the mouse will fix itself.
This also happens with chests, and in combat. Typically, switching characters works - but I've had occasions where nothing worked.
The worst was when I got trapped in Hawke's Home. There were no party members and my mouse couldn't click on anything.

For Luke:
I am in Full Screen - using DirectX 11 - and my resolution is 1920x1080.
Thanks for helping us with this problem!

[dupont1]

I have the same problem in dx9 and 11. DX11 is much worse though. On the bright side(pun intended) gamma is much better and I can see the game, just can't click on anything.

[eliesan]

Sounds like an echo to my problem! I've tried 800x600 (ack) 1350x760 and 1600x900 in DX 9 &11... if this was a live mouse it would starve to death.
I've tried windowed mode, but then the bottom of the screen is cut off and I can't see commands, fight abilities, etc.

This problem must be fixed otherwise the game is unplayable. Bioware, you have been outstanding until now.

Modifié par eliesan, 11 mars 2011 - 03:23 .

[Ganondorf2002]

Ok changing out of full screen worked for me as well. My native res is 1920 x 1080 16:9 like many others. Hopefully there will be a full screen fix

[Akolyte121]

I'm having the same problem too. Hopefully there will be a patch soon.

[Ganondorf2002]

what eventually worked for me was to go into the config utility and uncheck full screen, then enter the game. Play the game for a few minutes then exit. Go back to the config utility and recheck full screen mode. Now it works just fine.

[eliesan]

Gloomy80 suggested this:
create a shortcut for Dragonage2.exe located in the bin_ship folder.
Right click the shortcut and choose properties; in the compatibility tab check "Disable display scaling on high DPI settings."

I tried this and it WORKED.

Hope this helps. thanks again Gloomy80

[musicallie44]

eliesan wrote...

Gloomy80 suggested this:
create a shortcut for Dragonage2.exe located in the bin_ship folder.
Right click the shortcut and choose properties; in the compatibility tab check "Disable display scaling on high DPI settings."

I tried this and it WORKED.

Hope this helps. thanks again Gloomy80

Thanks for the information eliesan!  I'm going to try this setting for a few hours and see if it works for me.

[NetBeansAndJava]

eliesan wrote...

Gloomy80 suggested this:
create a shortcut for Dragonage2.exe located in the bin_ship folder.
Right click the shortcut and choose properties; in the compatibility tab check "Disable display scaling on high DPI settings."

I tried this and it WORKED.

Hope this helps. thanks again Gloomy80

This works for me!  Attention to all who are having the calibration problem, follow these instructions and it may work for you as well!

Simple fix for an annoying bug!  THANK YOU GLOOMY80!

[Luke Barrett]

Sorry for not following up quicker. Couple quick points:

- the 1680x1050 resolution is being interpreted by the .ini incorrectly right now so that may be causing the mouse issue if thats what you're running (try dropping it down one for now)

- HIGH DPI scaling is causing issues right now. Gloomy80s suggestion should* fix this issue for those affected by it

both of these will be fixed in the first patch (not the 1.01 hotfix)

[ozenglish]

@Gloomy80

You have just made my evening!!! Was purely frustrated now the game is bright as heck lol.. THANK YOU for giving me DX11

[samusjh95]

Had same issue with mouse. changed screen resolution to 1680x1050. mouse works fine now. thanks