2 réponses à ce sujet

[mozeNWrathe]

This is for a friend of mine.
Please, feel free to email any assistance to me at demonsreiche@yahoo.com
This is his computer build:

Operating System
MS Windows 7 Home Premium 64-bit
CPU
AMD Phenom II X4 810 30 °C
Deneb 45nm Technology
RAM
6.0GB Dual-Channel DDR3 @ 669MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co., Ltd. GA-MA770T-UD3P (Socket M2) 35 °C
Graphics
DELL E1910H (1366x768@60Hz)
ATI Radeon HD 5700 Series
Hard Drives
313GB Hitachi Hitachi HDP725032GLA360 ATA Device (SATA) 30 °C
Optical Drives
TSSTcorp CDDVDW SH-S202H ATA Device
Audio
ATI High Definition Audio Device

For some reason, the computer refuses to let NeverWinter Nights (original) run at full frame rate. He is using Windows 7 as the Administrator, and has set NWN to be run under such conditions. What could be causing this? I know that having multiple cores has proven to be a problem for NWN before, so I went onto a few forums to find this fix:

====================

Permanent solution Edit

Set a processor affinity in the configuration file.

To fix it permanently, open your nwnplayer.ini file (it is located in same directory as the game) and in [Game Options] section add this line (or change existing one to =1):
Client CPU Affinity=1

Now the NWN game will always use your second core.

====================

Sadly, that fix did not work. Are there any problems or programs he should be looking out for first? 

 

[Gregor Wyrmbane]

If he has set the compatibility mode to run the game in XP with service pack 2 or 3 and he's still having issues it's most likely a problem with the graphics card not having a driver that supports NWN. If you do a little searching in this sub forum you'll find several threads that discuss the issues folks are having with newer graphics cards not having drivers available that will support this game. I have to go to work right now or I'd try to find one that discusses your friends card, specifically.

[HipMaestro]

While Gregor is hunting, you may want to read a thread for a similar config that discusses suitable versions of the Catalyst driver that work with NWN here.  You need to find a driver that supports OpenGL.

(I'll amend if I find any more definitive threads around.)