22 réponses à ce sujet

[WytPony]

 Before posting the pictures, I will mention that my specs is above minimum since I am playing on a laptop and I do have the latest possible driver for my GPU. I'm also hoping that this is only an issue with the demo and won't be an issue in the actual game. 

Specs:
01 - Operating System----------------------------------
0101 - Operating System         : Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.110617-0336)0102 - Language                 : English (Regional Setting: English)0103 - BIOS                     : InsydeH2O Version 1.800104 - Processor                : Intel® Core™2 Duo CPU     T6400  @ 2.00GHz (2 CPUs), ~2.0GHz0105 - Memory                   : 4094MB RAM0107 - Page File                : 3568MB used, 4802MB available0108 - Windows Dir              : C:\\Windows0109 - DirectX Version          : DirectX 110110 - DX Setup Parameters      : Not found0114 - DxDiag Version           : 7.00.6002.18107
----------------------------------02 - Processor----------------------------------
0201 - Caption                  : Intel® Core™2 Duo CPU     T6400  @ 2.00GHz x2 ~2000MHz0202 - Current Clock Speed      : 2000MHz
----------------------------------03 - Video Adapter----------------------------------
0301 - Card Name                : ATI Mobility Radeon HD 3650 0302 - Manufacturer             : ATI Technologies Inc.0303 - Chip Type                : ATI Radeon Graphics Processor (0x9591)0304 - DAC Type                 : Internal DAC(400MHz)0305 - Device Key               : Enum\\PCI\\VEN_1002&DEV_9591&SUBSYS_FF1E1179&REV_000306 - Display Memory           : 2298 MB0307 - AdapterRAM               : 512.00 MB0308 - Current Mode             : 1280 x 800 (32 bit) (60Hz)0309 - Monitor Name             : Generic PnP Monitor0310 - Driver Name              : atiumdag,atidxx32,atidxx64.dll,atiumdva,atiumd64.dll,atiumd6a.cap,atitmm64.dll0311 - Driver Version           : 8.14.0010.06620312 - Driver Language          : English0313 - DDI Version              : 10.10315 - Driver Beta              : False0316 - Driver Debug             : False0317 - Driver Date              : 4/21/2009 21:51:400318 - Driver Size              : 3082752
0327 - Revision ID              : 0x00000330 - Video Accel              : ModeMPEG2_A ModeMPEG2_C 
0334 - DDraw Status             : Enabled0335 - D3D Status               : Enabled0336 - AGP Status               : Enabled0337 - Notes                    : No problems found.
0338 - OpenGL                   : 6.0.6000.16386 (vista_rtm.061101-2205)
----------------------------------04 - Memory----------------------------------
0401 - Total Memory             : 4.00 GB0402 - Free Memory              : 1.29 GB0403 - Total Pagefile           : 8.18 GB0404 - Free Pagefile            : 4.68 GB


Pictures:
(Looks alright in these menus)
media.giantbomb.com/uploads/0/5200/2133253-3.jpg

(Looks like this in the Main Menu and In-game)
media.giantbomb.com/uploads/0/5200/2133251-1.jpg

media.giantbomb.com/uploads/0/5200/2133254-4.jpg

[Fyk0]

That's clearly GPU related issue. Do you have anything like that in any other demanding game, did that never happen in ME2? GPU might be damaged, or driver installion got corrupted.

[WytPony]

ME 2 works fine. Just played it again recently and it went smoothly. I can even play the Witcher 2 with very low specs in this laptop just fine. However, I did notice a similar problem in the Reckoning demo. 

Modifié par WytPony, 20 février 2012 - 06:51 .

[Fyk0]

The card is quite old compared to latest drivers, it might cause problems to older cards. I would suggest clean installing some older ones instead to see does it makes difference.

[tsk16]

ooh I have the same thing, same as the OP I meet all the minimum requirements and most of the reccomended requirements.

I would have to reinstall ME2 to see if it works right now, but It ran perfectly before. I can play Skyrim.  Empire, Napoleon and Shogun Total War, Red Orchestra 2 all on maximum graphics (ish) ....hmmm

Modifié par tsk16, 20 février 2012 - 08:30 .

[Fyk0]

tsk16 wrote...

ooh I have the same thing

What GPU you have?

[tsk16]

just a sec, GPU is graphics card isn't it?


ATI Mobility Radeon HD 5145

Modifié par tsk16, 20 février 2012 - 08:32 .

[Fyk0]

So both ATI Mobility series, around same performance level. Are you running latest drivers as well? It might be causing the issue if ME 2 used to run well but not anymore.

[tsk16]

I'll reinstall it tomorrow and see what happens

I think the drivers are fairly recent

[Fredvdp]

tsk16 wrote...
I meet all the minimum requirements

tsk16 wrote...

ATI Mobility Radeon HD 5145

That's pretty far below the minimum system requirements. Still, while the performance should be unplayable the visuals shoudn't look like that.

Modifié par Fredvdp, 20 février 2012 - 10:03 .

[WytPony]

Yeah I'm confused as to why the graphics would start looking like that...it doesn't make sense. I do some registry cleaning once in awhile and i did it some time before and after installing the demo.

[tsk16]

actually the game runs fine, the frame rate is perfect and graphics are all on high except that red issue

according to "can you run it" I meet everything required to at least play the game

[Jimud]

Hey I sent a message yesterday to the OP. There should be a check box in your gfx settings under 3D on radeon/AMD cards to fix horizontal/vertical lines when I checked this it fixed the red outline problem! Try it out and see if it works for any of you guys!

[tsk16]

ah okay thankyou

I have my AMD Catalyst Control open and I'm on "gaming/3d application settings" but I'm not sure where that particualr option is

Modifié par tsk16, 21 février 2012 - 02:37 .

[tsk16]

sorry about the double post

Modifié par tsk16, 21 février 2012 - 02:33 .

[Jimud]

Hey my settings: Anti Analising-let App decide
Adaptive AA Off
smoothvision HD:let app decide
Catalys AI:Advanced
then the rest on performace (Personal prefrence)
Putting these setting in fixed it for me
then in API Specific:support DXT textures
triple buffering On
forxe 24 bit z buffer.
It seems the game will run fine on these without alternate pixel center.(the setting that fixes horizontal / vertical lines)
Hope this helps someone

[WytPony]

Yeah i dont seem to have those options as well...is there a way to enable them?

[Jimud]

I dunno I'm on x1800 nd I'm on legacy 10.2 what driver are you on?
the above mentioned setting are in Catalyst control center not in game, just to make sure.
everything should be under the 3D drop down menu.

[WytPony]

Never mind, its fixed.. thanks for the tip! Works fine for me now. Don't know which setting in particular affected it but I don't want to test it again since I just reinstalled the driver and then did some registry cleaning. I just opted to use application settings for most of the options and now it runs without the janky red lines. Thanks again, Jimud!

[Fredvdp]

tsk16 wrote...

actually the game runs fine, the frame rate is perfect and graphics are all on high except that red issue

according to "can you run it" I meet everything required to at least play the game

That site is almost always wrong and shouldn't be trusted. You don't meet the system requirements and "Can You Run It" is wrong.

[Gorath Alpha]

tsk16 wrote...

just a sec, GPU is graphics card isn't it?

ATI Mobility Radeon HD 5145

Like any other Mass Effect, actual graphics cards are required.  TTBOMK, that number "HD 5145" is merely an onboard video chip built into the chipset, and cannot qualify to meet any minimum for any Mass Effect. 

[tsk16]

hmm it ran Mass Effect 1 and 2 perfectly.....odd

Anyway regardless of whether I should be able to run the game at all....the red line issue seems to be resolved
so thankyou Jimud for your help and suggestions 

Modifié par tsk16, 21 février 2012 - 08:21 .

[Jimud]

No problem guys!! It looks a lot better now ^^ Glad this helped you guys & any others that stumble across this problem.