15 réponses à ce sujet

[emeraldtrader]

sorry, but I have been looking for the answer and can't find it.

I can not enable the PC game console. even with following the directions from DA wiki and other online help. 

below is the problem:

...Right click on the shortcut, choose properties, then add the following to the end of line in the "Target" field: -enabledeveloperconsole — 

nothing can be typed into the target field. I bought the disk brand new about 6 months ago. had the ability to enable the console been, uh, disabled?

[coldwetn0se]

Okay....it is most likely working. Unless you have applied a specific mod to the game (check dragonage.nexus - can't remember the name of the mod specifically off-hand), the console will NOT show what you have typed in...what you type in doesn't show up in characters. Now, if I am misreading what you have posted, please forgive me, but I urge you to check out the nexus for said mod....if I remember correctly, it also has some instructions regarding the console which could be helpful. Good luck.

[mnomaha]

Also make sure there is a space between the last quotation mark and the hyphen...it took me forever to make mine work because of that stupid space.

It should look exactly like:

"C:\\Program Files\\Dragon Age\\bin_ship\\daorigins.exe" -enabledeveloperconsole

And yeah, like Coldi said...stupid thing doesn't show up...

[emeraldtrader]

I have 3 face mods for my DA2 and one ERF file 'mw_imort_fix"

when I past c:/program files/dragon age 2 into my search box I get no items match your search
typing c:/program files/dragon age 2 gets no items match your search

the path to get to my bin_ship file is C:\\Program Files (x86)\\Dragon Age 2\\bin_ship

[Blazomancer]

@emeraldtrader - Don't worry, I've bought the game (physical media) last November and I've successfully used the developer's console; so, it's surely not disabled.

First, go to C:\\Program Files(x86)\\Dragon Age II\\bin_ship.

Inside bin_ship folder, you'll find DragonAge2.exe. Right click on it, select 'Send to', then 'Desktop(create shortcut)'.

The shortcut should be on your desktop. You should be able to edit the target field now. Also, make sure to have a space between the last quotation mark and the hyphen, as already mentioned above.

[emeraldtrader]

Thanks for all that have taken time to help this computer noob

Blazomancer...I have gone into my bin_ship file and there is no file labeled DragonAge2.exe
this are all the files under bin_ship:
Core (file folder)
binkw32.dll
cudart32_30_.dll
da2gdf.dll
DragonAge2 (this one opens the game)
DragonAge2.par
DragonAge2config
msvcp71.dll
msvcr71.dll
nxcharacter.dll
physxcooking.dll
physxcore.dll
physxloader.dll
umbra32.dll
unrar.dll

all these are application extensions

[emeraldtrader]

ok made the short cut...hit properties... put -enabledeveloperconsole into the target box...this is what come up:

"the name '-enabledeveloperconsole' specified in the target box is not valid. make sure the path and file name are correct."

if I added the -enabledeveloperconsole to the address in the target box, the "dragonAge2-shortcut properties" just disappears

[Bolt]

emeraldtrader wrote...

ok made the short cut...hit properties... put -enabledeveloperconsole into the target box...this is what come up:

"the name '-enabledeveloperconsole' specified in the target box is not valid. make sure the path and file name are correct."

if I added the -enabledeveloperconsole to the address in the target box, the "dragonAge2-shortcut properties" just disappears

Did you put a space in between dragonage2.exe and -enabledeveloperconsole?  It should read like this, quotation marks and all:

"C:\\Program Files (x86)\\Dragon Age 2\\bin_ship\\DragonAge2.exe" -enabledeveloperconsole

[emeraldtrader]

were will the console show up? what does it look like?
after I put the address in the target box, I hit/chose "ok" then the box disappears. nothing shows up

[Blazomancer]

The console is available inside the game. Being a command line interface, It doesn't really look like anything other than a ">". Press 'backtick' (` below ~) to display the console, but umm,,well, it's not really visible in DA2; so try moving your hawke around, if he/she doesn't move, you know the console's active. Type in whatever command you wish to use, doing so carefully as you'll unable to check for typos later, and then press 'enter'. Continue accordingly.

[emeraldtrader]

OMG! I think I got it!
thanks so much for all your help...I am having a little trouble working the console, but with more practice I'll figure it out.
has anyone debugged a characters friendship stat?

[Blazomancer]

Hehe, yes, I used it exactly for that purpose once, as I ended up with 5 approval points less for Isabela to not say byebye.

Use 'runscript zz_app_debug' or use the specific debug commands for each companion as stated in the wiki. The options should be self explanatory.