8 réponses à ce sujet

[Chaos_nameless]

 Hi there, i recently bought neverwinter nigths 2 and during gameplay something weird happened.

During a quest in the ironfist stronghold (i think its a personal quest of khelgar) theres a cutscene where the party see´s a bunch of monsters arguing over loot and after that cutscene the members of the party don´t do anything anymore.

They don´t follow and they don´t responde to attacks neither against the PC or themselves.

If anyone has a solution i would be apreciated.

[Dann-J]

During cutscene conversations, party members are often made 'uncommandable' at the start to stop them from moving about or attacking on their own. The last nodes of the conversation will then make them 'commandable' again. It sounds like that second conversation script didn't fire properly, and they're still in their uncommandable cutscene mode.

I don't know if there's a console command that allows you to do it manually for each party member, but you might be able to run the existing conversation script directly from the console if you knew what the script was called (it probably starts with GA_).

[Edit:]
 
The conversation scripts are called 'ga_party_freeze' and 'ga_party_unfreeze'. The latter might be the one you want. I use them myself when I want to reposition party members during a cutscene, otherwise they keep trying to approach the PC to get within following distance.

The following entered via the console (~) might do the trick:

debugmode 1
rs ga_party_unfreeze
debugmode 0

Modifié par DannJ, 20 septembre 2013 - 05:15 .

[Axe_Edge]

Try turning the AI off (lower left corner of GUI, by the rest button), then turn the AI back on. Sometimes that gets stuck.

Worth a try.

[Chaos_nameless]

So i turned te ai off and on and that didn´t do anything.

And the debug thing, aparenttly theres no keymapping for that, i went to to options and theres no button to open the console mode.

[metatheurgist]

Did you try broadcasting a "Follow Me" command?

[I_Raps]

 To open the debug console, you have to type `
On an American keyboard, it's on the key next to 1! along with ~
If you have a different keyboard, check this thread:  Help with the AS (Artificial Stupidity)

That thread might also be of some general use to you, since it deals with the same sort of problem.

One thing about your specific case:  there is one more batch of bugbears ahead;  if you can solo them, you'll reach a gate that launches another cutscene.  That might set everything back to normal.

Modifié par I_Raps, 20 septembre 2013 - 04:41 .

[Chaos_nameless]

I used the follow me command and nothing changed and i still can´t open the debug console.

[I_Raps]

In C:\\Users\\*YOU*\\Documents\\Neverwinter Nights 2 you will find a file called nwn2player.ini.

You can open this in a simple text editor like Notepad. Look for the line that says "Console=" and see what key it requires.

Also:

From: Rimmer_Dall 2 years ago

Answer
You can use the chatbox instead of the console to input console commands. Simply press enter, type ##DebugMode 1 (to enable cheats) and prefix all console commands with ##.

Note that console commands are cAsE SEnsiTiVe.


Also, I would definitely try pushing on to the next gate.

Modifié par I_Raps, 20 septembre 2013 - 05:42 .

[Chaos_nameless]

I used the Notepad to change the console key (it was ` weird).

I type´d the unfreeze command and it worked.

Thanks for the help .